+2001-10-09
+
+ * updated some autotool scripts.
+
2001-10-08
* version 0.6.3
+2001-10-09 [paul] 0.6.3claws3
+
+ * sync with sylpheed 0.6.3cvs1
+ updated some autotool scripts
+
2001-10-09 [darko] 0.6.3claws2
* src/gtkstext.[ch]
+2001-10-09
+
+ * ¤¤¤¯¤Ä¤«¤Î autotool ¥¹¥¯¥ê¥×¥È¤ò¹¹¿·¡£
+
2001-10-08
* version 0.6.3
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
# Free Software Foundation, Inc.
-timestamp='2001-04-20'
+timestamp='2001-09-04'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
GNU config.guess ($timestamp)
Originally written by Per Bothner.
-Copyright (C) 1992, 93, 94, 95, 96, 97, 98, 99, 2000
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
# use `HOST_CC' if defined, but it is deprecated.
-case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,) echo "int dummy(){}" > $dummy.c
+set_cc_for_build='case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,) echo "int dummy(){}" > $dummy.c ;
for c in cc gcc c89 ; do
- ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1
+ ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1 ;
if test $? = 0 ; then
- CC_FOR_BUILD="$c"; break
- fi
- done
- rm -f $dummy.c $dummy.o $dummy.rel
+ CC_FOR_BUILD="$c"; break ;
+ fi ;
+ done ;
+ rm -f $dummy.c $dummy.o $dummy.rel ;
if test x"$CC_FOR_BUILD" = x ; then
- CC_FOR_BUILD=no_compiler_found
+ CC_FOR_BUILD=no_compiler_found ;
fi
;;
,,*) CC_FOR_BUILD=$CC ;;
,*,*) CC_FOR_BUILD=$HOST_CC ;;
-esac
+esac'
# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@noc.rutgers.edu 8/24/94.)
+# (ghazi@noc.rutgers.edu 1994-08-24)
if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
PATH=$PATH:/.attbin ; export PATH
fi
# to ELF recently, or will in the future.
case "${UNAME_MACHINE}" in
i386|sparc|amiga|arm*|hp300|mvme68k|vax|atari|luna68k|mac68k|news68k|next68k|pc532|sun3*|x68k)
+ eval $set_cc_for_build
if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
| grep __ELF__ >/dev/null
then
jsr \$26,exit
.end main
EOF
+ eval $set_cc_for_build
$CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
if test "$?" = 0 ; then
case `./$dummy` in
2-307)
UNAME_MACHINE="alphaev67"
;;
+ 2-1307)
+ UNAME_MACHINE="alphaev68"
+ ;;
esac
fi
rm -f $dummy.s $dummy
aushp:SunOS:*:*)
echo sparc-auspex-sunos${UNAME_RELEASE}
exit 0 ;;
+ sparc*:NetBSD:*)
+ echo `uname -p`-unknown-netbsd${UNAME_RELEASE}
+ exit 0 ;;
atari*:OpenBSD:*:*)
echo m68k-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
echo clipper-intergraph-clix${UNAME_RELEASE}
exit 0 ;;
mips:*:*:UMIPS | mips:*:*:RISCos)
+ eval $set_cc_for_build
sed 's/^ //' << EOF >$dummy.c
#ifdef __cplusplus
#include <stdio.h> /* for printf() prototype */
exit 0 ;;
*:AIX:2:3)
if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+ eval $set_cc_for_build
sed 's/^ //' << EOF >$dummy.c
#include <sys/systemcfg.h>
fi ;;
esac
if [ "${HP_ARCH}" = "" ]; then
+ eval $set_cc_for_build
sed 's/^ //' << EOF >$dummy.c
#define _HPUX_SOURCE
exit (0);
}
EOF
- (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
- if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi
- rm -f $dummy.c $dummy
+ (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
+ if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi
+ rm -f $dummy.c $dummy
fi ;;
esac
echo ${HP_ARCH}-hp-hpux${HPUX_REV}
echo ia64-hp-hpux${HPUX_REV}
exit 0 ;;
3050*:HI-UX:*:*)
+ eval $set_cc_for_build
sed 's/^ //' << EOF >$dummy.c
#include <unistd.h>
int
9000/8??:4.3bsd:*:*)
echo hppa1.0-hp-bsd
exit 0 ;;
- *9??*:MPE/iX:*:*)
+ *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
echo hppa1.0-hp-mpeix
exit 0 ;;
hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
echo xmp-cray-unicos
exit 0 ;;
CRAY*Y-MP:*:*:*)
- echo ymp-cray-unicos${UNAME_RELEASE}
+ echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
exit 0 ;;
CRAY*[A-Z]90:*:*:*)
echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
- -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
+ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+ -e 's/\.[^.]*$/.X/'
exit 0 ;;
CRAY*TS:*:*:*)
echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
echo ${UNAME_MACHINE}-unknown-linux-gnu
exit 0 ;;
mips:Linux:*:*)
- cat >$dummy.c <<EOF
-#ifdef __cplusplus
-#include <stdio.h> /* for printf() prototype */
-int main (int argc, char *argv[]) {
-#else
-int main (argc, argv) int argc; char *argv[]; {
-#endif
-#ifdef __MIPSEB__
- printf ("%s-unknown-linux-gnu\n", argv[1]);
-#endif
-#ifdef __MIPSEL__
- printf ("%sel-unknown-linux-gnu\n", argv[1]);
-#endif
- return 0;
-}
-EOF
- $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm -f $dummy.c $dummy && exit 0
- rm -f $dummy.c $dummy
+ case `sed -n '/^byte/s/^.*: \(.*\) endian/\1/p' < /proc/cpuinfo` in
+ big) echo mips-unknown-linux-gnu && exit 0 ;;
+ little) echo mipsel-unknown-linux-gnu && exit 0 ;;
+ esac
;;
ppc:Linux:*:*)
- # Determine Lib Version
- cat >$dummy.c <<EOF
-#include <features.h>
-#if defined(__GLIBC__)
-extern char __libc_version[];
-extern char __libc_release[];
-#endif
-main(argc, argv)
- int argc;
- char *argv[];
-{
-#if defined(__GLIBC__)
- printf("%s %s\n", __libc_version, __libc_release);
-#else
- printf("unknown\n");
-#endif
- return 0;
-}
-EOF
- LIBC=""
- $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null
- if test "$?" = 0 ; then
- ./$dummy | grep 1\.99 > /dev/null
- if test "$?" = 0 ; then LIBC="libc1" ; fi
- fi
- rm -f $dummy.c $dummy
- echo powerpc-unknown-linux-gnu${LIBC}
+ echo powerpc-unknown-linux-gnu
+ exit 0 ;;
+ ppc64:Linux:*:*)
+ echo powerpc64-unknown-linux-gnu
exit 0 ;;
alpha:Linux:*:*)
- cat <<EOF >$dummy.s
- .data
- \$Lformat:
- .byte 37,100,45,37,120,10,0 # "%d-%x\n"
- .text
- .globl main
- .align 4
- .ent main
- main:
- .frame \$30,16,\$26,0
- ldgp \$29,0(\$27)
- .prologue 1
- .long 0x47e03d80 # implver \$0
- lda \$2,-1
- .long 0x47e20c21 # amask \$2,\$1
- lda \$16,\$Lformat
- mov \$0,\$17
- not \$1,\$18
- jsr \$26,printf
- ldgp \$29,0(\$26)
- mov 0,\$16
- jsr \$26,exit
- .end main
-EOF
- LIBC=""
- $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
- if test "$?" = 0 ; then
- case `./$dummy` in
- 0-0) UNAME_MACHINE="alpha" ;;
- 1-0) UNAME_MACHINE="alphaev5" ;;
- 1-1) UNAME_MACHINE="alphaev56" ;;
- 1-101) UNAME_MACHINE="alphapca56" ;;
- 2-303) UNAME_MACHINE="alphaev6" ;;
- 2-307) UNAME_MACHINE="alphaev67" ;;
- esac
- objdump --private-headers $dummy | \
- grep ld.so.1 > /dev/null
- if test "$?" = 0 ; then
- LIBC="libc1"
- fi
- fi
- rm -f $dummy.s $dummy
+ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+ EV5) UNAME_MACHINE=alphaev5 ;;
+ EV56) UNAME_MACHINE=alphaev56 ;;
+ PCA56) UNAME_MACHINE=alphapca56 ;;
+ PCA57) UNAME_MACHINE=alphapca56 ;;
+ EV6) UNAME_MACHINE=alphaev6 ;;
+ EV67) UNAME_MACHINE=alphaev67 ;;
+ EV68*) UNAME_MACHINE=alphaev68 ;;
+ esac
+ objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
+ if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
exit 0 ;;
parisc:Linux:*:* | hppa:Linux:*:*)
# The BFD linker knows what the default object file format is, so
# first see if it will tell us. cd to the root directory to prevent
# problems with other programs or directories called `ld' in the path.
- ld_supported_emulations=`cd /; ld --help 2>&1 \
- | sed -ne '/supported emulations:/!d
+ ld_supported_targets=`cd /; ld --help 2>&1 \
+ | sed -ne '/supported targets:/!d
s/[ ][ ]*/ /g
- s/.*supported emulations: *//
+ s/.*supported targets: *//
s/ .*//
p'`
- case "$ld_supported_emulations" in
- i*86linux)
- echo "${UNAME_MACHINE}-pc-linux-gnuaout"
- exit 0
- ;;
- elf_i*86)
+ case "$ld_supported_targets" in
+ elf32-i386)
TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
;;
- i*86coff)
+ a.out-i386-linux)
+ echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+ exit 0 ;;
+ coff-i386)
echo "${UNAME_MACHINE}-pc-linux-gnucoff"
- exit 0
- ;;
- esac
- # Either a pre-BFD a.out linker (linux-gnuoldld)
- # or one that does not give us useful --help.
- # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout.
- # If ld does not provide *any* "supported emulations:"
- # that means it is gnuoldld.
- test -z "$ld_supported_emulations" && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0
- case "${UNAME_MACHINE}" in
- i*86)
- VENDOR=pc;
- ;;
- *)
- VENDOR=unknown;
- ;;
+ exit 0 ;;
+ "")
+ # Either a pre-BFD a.out linker (linux-gnuoldld) or
+ # one that does not give us useful --help.
+ echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
+ exit 0 ;;
esac
# Determine whether the default compiler is a.out or elf
+ eval $set_cc_for_build
cat >$dummy.c <<EOF
#include <features.h>
#ifdef __cplusplus
#ifdef __ELF__
# ifdef __GLIBC__
# if __GLIBC__ >= 2
- printf ("%s-${VENDOR}-linux-gnu\n", argv[1]);
+ printf ("%s-pc-linux-gnu\n", argv[1]);
# else
- printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+ printf ("%s-pc-linux-gnulibc1\n", argv[1]);
# endif
# else
- printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+ printf ("%s-pc-linux-gnulibc1\n", argv[1]);
# endif
#else
- printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]);
+ printf ("%s-pc-linux-gnuaout\n", argv[1]);
#endif
return 0;
}
rm -f $dummy.c $dummy
test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
;;
-# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions
-# are messed up and put the nodename in both sysname and nodename.
i*86:DYNIX/ptx:4*:*)
+ # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+ # earlier versions are messed up and put the nodename in both
+ # sysname and nodename.
echo i386-sequent-sysv4
exit 0 ;;
i*86:UNIX_SV:4.2MP:2.*)
echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
fi
exit 0 ;;
- i*86:*:5:7*)
- # Fixed at (any) Pentium or better
- UNAME_MACHINE=i586
- if [ ${UNAME_SYSTEM} = "UnixWare" ] ; then
- echo ${UNAME_MACHINE}-sco-sysv${UNAME_RELEASE}uw${UNAME_VERSION}
- else
- echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
- fi
+ i*86:*:5:[78]*)
+ case `/bin/uname -X | grep "^Machine"` in
+ *486*) UNAME_MACHINE=i486 ;;
+ *Pentium) UNAME_MACHINE=i586 ;;
+ *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+ esac
+ echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
exit 0 ;;
i*86:*:3.2:*)
if test -f /usr/options/cb.name; then
echo ns32k-sni-sysv
fi
exit 0 ;;
- PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
- # says <Richard.M.Bartel@ccMail.Census.GOV>
+ PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+ # says <Richard.M.Bartel@ccMail.Census.GOV>
echo i586-unisys-sysv4
exit 0 ;;
*:UNIX_System_V:4*:FTX*)
# From seanf@swdc.stratus.com.
echo i860-stratus-sysv4
exit 0 ;;
+ *:VOS:*:*)
+ # From Paul.Green@stratus.com.
+ echo hppa1.1-stratus-vos
+ exit 0 ;;
mc68*:A/UX:*:*)
echo m68k-apple-aux${UNAME_RELEASE}
exit 0 ;;
*:ITS:*:*)
echo pdp10-unknown-its
exit 0 ;;
+ i*86:XTS-300:*:STOP)
+ echo ${UNAME_MACHINE}-unknown-stop
+ exit 0 ;;
+ i*86:atheos:*:*)
+ echo ${UNAME_MACHINE}-unknown-atheos
+ exit 0 ;;
esac
#echo '(No uname command or uname output not recognized.)' 1>&2
#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+eval $set_cc_for_build
cat >$dummy.c <<EOF
#ifdef _SEQUENT_
# include <sys/types.h>
#! /bin/sh
-# Configuration validation subroutine script, version 1.1.
-# Copyright (C) 1991, 92-97, 1998, 1999 Free Software Foundation, Inc.
+# Configuration validation subroutine script.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+
+timestamp='2001-09-07'
+
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
# can handle that machine. It does not imply ALL GNU software can.
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
+# Please send patches to <config-patches@gnu.org>.
+#
# Configuration subroutine to validate and canonicalize a configuration type.
# Supply the specified configuration type as an argument.
# If it is invalid, we print an error message on stderr and exit with code 1.
# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
# It is wrong to echo any other type of specification.
-if [ x$1 = x ]
-then
- echo Configuration name missing. 1>&2
- echo "Usage: $0 CPU-MFR-OPSYS" 1>&2
- echo "or $0 ALIAS" 1>&2
- echo where ALIAS is a recognized configuration type. 1>&2
- exit 1
-fi
+me=`echo "$0" | sed -e 's,.*/,,'`
-# First pass through any local machine types.
-case $1 in
- *local*)
- echo $1
- exit 0
- ;;
- *)
- ;;
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+ $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit 0 ;;
+ --version | -v )
+ echo "$version" ; exit 0 ;;
+ --help | --h* | -h )
+ echo "$usage"; exit 0 ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help"
+ exit 1 ;;
+
+ *local*)
+ # First pass through any local machine types.
+ echo $1
+ exit 0;;
+
+ * )
+ break ;;
+ esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+ exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+ exit 1;;
esac
# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
# Here we must recognize all the valid KERNEL-OS combinations.
maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
case $maybe_os in
- linux-gnu*)
+ nto-qnx* | linux-gnu* | storm-chaos* | os2-emx* | windows32-*)
os=-$maybe_os
basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
;;
-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
- -apple)
+ -apple | -axis)
os=
basic_machine=$1
;;
-scout)
;;
-wrs)
- os=vxworks
+ os=-vxworks
basic_machine=$1
;;
+ -chorusos*)
+ os=-chorusos
+ basic_machine=$1
+ ;;
+ -chorusrdb)
+ os=-chorusrdb
+ basic_machine=$1
+ ;;
-hiux*)
os=-hiuxwe2
;;
-psos*)
os=-psos
;;
+ -mint | -mint[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
esac
# Decode aliases for certain CPU-COMPANY combinations.
case $basic_machine in
# Recognize the basic CPU types without company name.
# Some are omitted here because they have special meanings below.
- tahoe | i860 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \
- | arme[lb] | pyramid | mn10200 | mn10300 | tron | a29k \
- | 580 | i960 | h8300 \
- | hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w | hppa2.0n \
- | alpha | alphaev[4-7] | alphaev56 | alphapca5[67] \
- | we32k | ns16k | clipper | i370 | sh | powerpc | powerpcle \
- | 1750a | dsp16xx | pdp11 | mips16 | mips64 | mipsel | mips64el \
- | mips64orion | mips64orionel | mipstx39 | mipstx39el \
- | mips64vr4300 | mips64vr4300el | mips64vr4100 | mips64vr4100el \
- | mips64vr5000 | miprs64vr5000el \
- | sparc | sparclet | sparclite | sparc64 | sparcv9 | v850 | c4x \
- | thumb | d10v)
+ 1750a | 580 \
+ | a29k \
+ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
+ | c4x | clipper \
+ | d10v | d30v | dsp16xx \
+ | fr30 \
+ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+ | i370 | i860 | i960 | ia64 \
+ | m32r | m68000 | m68k | m88k | mcore \
+ | mips16 | mips64 | mips64el | mips64orion | mips64orionel \
+ | mips64vr4100 | mips64vr4100el | mips64vr4300 \
+ | mips64vr4300el | mips64vr5000 | mips64vr5000el \
+ | mipsbe | mipseb | mipsel | mipsle | mipstx39 | mipstx39el \
+ | mipsisa32 \
+ | mn10200 | mn10300 \
+ | ns16k | ns32k \
+ | openrisc \
+ | pdp10 | pdp11 | pj | pjl \
+ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
+ | pyramid \
+ | s390 | s390x \
+ | sh | sh[34] | sh[34]eb | shbe | shle \
+ | sparc | sparc64 | sparclet | sparclite | sparcv9 | sparcv9b \
+ | stormy16 | strongarm \
+ | tahoe | thumb | tic80 | tron \
+ | v850 \
+ | we32k \
+ | x86 | xscale \
+ | z8k)
basic_machine=$basic_machine-unknown
;;
- m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | z8k | v70 | h8500 | w65)
+ m6811 | m68hc11 | m6812 | m68hc12)
+ # Motorola 68HC11/12.
+ basic_machine=$basic_machine-unknown
+ os=-none
+ ;;
+ m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
;;
# We use `pc' rather than `unknown'
# because (1) that's what they normally are, and
# (2) the word "unknown" tends to confuse beginning users.
- i[34567]86)
+ i*86 | x86_64)
basic_machine=$basic_machine-pc
;;
# Object if more than one company name word.
exit 1
;;
# Recognize the basic CPU types with company name.
- vax-* | tahoe-* | i[34567]86-* | i860-* | m32r-* | m68k-* | m68000-* \
- | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | arm-* | c[123]* \
- | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
- | power-* | none-* | 580-* | cray2-* | h8300-* | h8500-* | i960-* \
- | xmp-* | ymp-* \
- | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* | hppa2.0n-* \
- | alpha-* | alphaev[4-7]-* | alphaev56-* | alphapca5[67]-* \
- | we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \
- | clipper-* | orion-* \
- | sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \
- | sparc64-* | sparcv9-* | sparc86x-* | mips16-* | mips64-* | mipsel-* \
- | mips64el-* | mips64orion-* | mips64orionel-* \
- | mips64vr4100-* | mips64vr4100el-* | mips64vr4300-* | mips64vr4300el-* \
- | mipstx39-* | mipstx39el-* \
- | f301-* | armv*-* | t3e-* \
- | m88110-* | m680[01234]0-* | m683?2-* | m68360-* | z8k-* | d10v-* \
- | thumb-* | v850-* | d30v-* | tic30-* | c30-* )
+ 580-* \
+ | a29k-* \
+ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+ | alphapca5[67]-* | arc-* \
+ | arm-* | armbe-* | armle-* | armv*-* \
+ | bs2000-* \
+ | c[123]* | c30-* | [cjt]90-* | c54x-* \
+ | clipper-* | cray2-* | cydra-* \
+ | d10v-* | d30v-* \
+ | elxsi-* \
+ | f30[01]-* | f700-* | fr30-* | fx80-* \
+ | h8300-* | h8500-* \
+ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+ | i*86-* | i860-* | i960-* | ia64-* \
+ | m32r-* \
+ | m68000-* | m680[01234]0-* | m68360-* | m683?2-* | m68k-* \
+ | m88110-* | m88k-* | mcore-* \
+ | mips-* | mips16-* | mips64-* | mips64el-* | mips64orion-* \
+ | mips64orionel-* | mips64vr4100-* | mips64vr4100el-* \
+ | mips64vr4300-* | mips64vr4300el-* | mipsbe-* | mipseb-* \
+ | mipsle-* | mipsel-* | mipstx39-* | mipstx39el-* \
+ | none-* | np1-* | ns16k-* | ns32k-* \
+ | orion-* \
+ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
+ | pyramid-* \
+ | romp-* | rs6000-* \
+ | s390-* | s390x-* \
+ | sh-* | sh[34]-* | sh[34]eb-* | shbe-* | shle-* \
+ | sparc-* | sparc64-* | sparc86x-* | sparclite-* \
+ | sparcv9-* | sparcv9b-* | stormy16-* | strongarm-* | sv1-* \
+ | t3e-* | tahoe-* | thumb-* | tic30-* | tic54x-* | tic80-* | tron-* \
+ | v850-* | vax-* \
+ | we32k-* \
+ | x86-* | x86_64-* | xmp-* | xps100-* | xscale-* \
+ | ymp-* \
+ | z8k-*)
;;
# Recognize the various machine names and aliases which stand
# for a CPU type and a company and sometimes even an OS.
os=-sysv
;;
amiga | amiga-*)
- basic_machine=m68k-cbm
+ basic_machine=m68k-unknown
;;
amigaos | amigados)
- basic_machine=m68k-cbm
+ basic_machine=m68k-unknown
os=-amigaos
;;
amigaunix | amix)
- basic_machine=m68k-cbm
+ basic_machine=m68k-unknown
os=-sysv4
;;
apollo68)
basic_machine=cray2-cray
os=-unicos
;;
- [ctj]90-cray)
- basic_machine=c90-cray
+ [cjt]90)
+ basic_machine=${basic_machine}-cray
os=-unicos
;;
crds | unos)
basic_machine=m68k-crds
;;
+ cris | cris-* | etrax*)
+ basic_machine=cris-axis
+ ;;
da30 | da30-*)
basic_machine=m68k-da30
;;
basic_machine=tron-gmicro
os=-sysv
;;
+ go32)
+ basic_machine=i386-pc
+ os=-go32
+ ;;
h3050r* | hiux*)
basic_machine=hppa1.1-hitachi
os=-hiuxwe2
;;
i370-ibm* | ibm*)
basic_machine=i370-ibm
- os=-mvs
;;
# I'm not sure what "Sysv32" means. Should this be sysv3.2?
- i[34567]86v32)
+ i*86v32)
basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-sysv32
;;
- i[34567]86v4*)
+ i*86v4*)
basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-sysv4
;;
- i[34567]86v)
+ i*86v)
basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-sysv
;;
- i[34567]86sol2)
+ i*86sol2)
basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
os=-solaris2
;;
basic_machine=i386-unknown
os=-vsta
;;
- i386-go32 | go32)
- basic_machine=i386-unknown
- os=-go32
- ;;
- i386-mingw32 | mingw32)
- basic_machine=i386-unknown
- os=-mingw32
- ;;
iris | iris4d)
basic_machine=mips-sgi
case $os in
basic_machine=ns32k-utek
os=-sysv
;;
+ mingw32)
+ basic_machine=i386-pc
+ os=-mingw32
+ ;;
miniframe)
basic_machine=m68000-convergent
;;
- *mint | *MiNT)
+ *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
basic_machine=m68k-atari
os=-mint
;;
mips3*)
basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
;;
+ mmix*)
+ basic_machine=mmix-knuth
+ os=-mmixware
+ ;;
monitor)
basic_machine=m68k-rom68k
os=-coff
;;
msdos)
- basic_machine=i386-unknown
+ basic_machine=i386-pc
os=-msdos
;;
+ mvs)
+ basic_machine=i370-ibm
+ os=-mvs
+ ;;
ncr3000)
basic_machine=i486-ncr
os=-sysv4
os=-netbsd
;;
netwinder)
- basic_machine=armv4l-corel
+ basic_machine=armv4l-rebel
os=-linux
;;
news | news700 | news800 | news900)
basic_machine=i960-intel
os=-mon960
;;
+ nonstopux)
+ basic_machine=mips-compaq
+ os=-nonstopux
+ ;;
np1)
basic_machine=np1-gould
;;
+ nsr-tandem)
+ basic_machine=nsr-tandem
+ ;;
op50n-* | op60c-*)
basic_machine=hppa1.1-oki
os=-proelf
pc532 | pc532-*)
basic_machine=ns32k-pc532
;;
- pentium | p5 | k5 | k6 | nexen)
+ pentium | p5 | k5 | k6 | nexgen)
basic_machine=i586-pc
;;
- pentiumpro | p6 | 6x86)
+ pentiumpro | p6 | 6x86 | athlon)
basic_machine=i686-pc
;;
pentiumii | pentium2)
- basic_machine=i786-pc
+ basic_machine=i686-pc
;;
- pentium-* | p5-* | k5-* | k6-* | nexen-*)
+ pentium-* | p5-* | k5-* | k6-* | nexgen-*)
basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
- pentiumpro-* | p6-* | 6x86-*)
+ pentiumpro-* | p6-* | 6x86-* | athlon-*)
basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
pentiumii-* | pentium2-*)
- basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
pn)
basic_machine=pn-gould
;;
- power) basic_machine=rs6000-ibm
+ power) basic_machine=power-ibm
;;
ppc) basic_machine=powerpc-unknown
;;
ppcle-* | powerpclittle-*)
basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
;;
+ ppc64) basic_machine=powerpc64-unknown
+ ;;
+ ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+ basic_machine=powerpc64le-unknown
+ ;;
+ ppc64le-* | powerpc64little-*)
+ basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
ps2)
basic_machine=i386-ibm
;;
+ pw32)
+ basic_machine=i586-unknown
+ os=-pw32
+ ;;
rom68k)
basic_machine=m68k-rom68k
os=-coff
sun386 | sun386i | roadrunner)
basic_machine=i386-sun
;;
+ sv1)
+ basic_machine=sv1-cray
+ os=-unicos
+ ;;
symmetry)
basic_machine=i386-sequent
os=-dynix
basic_machine=t3e-cray
os=-unicos
;;
+ tic54x | c54x*)
+ basic_machine=tic54x-unknown
+ os=-coff
+ ;;
tx39)
basic_machine=mipstx39-unknown
;;
basic_machine=hppa1.1-winbond
os=-proelf
;;
+ windows32)
+ basic_machine=i386-pc
+ os=-windows32-msvcrt
+ ;;
xmp)
basic_machine=xmp-cray
os=-unicos
vax)
basic_machine=vax-dec
;;
+ pdp10)
+ # there are many clones, so DEC is not a safe bet
+ basic_machine=pdp10-unknown
+ ;;
pdp11)
basic_machine=pdp11-dec
;;
we32k)
basic_machine=we32k-att
;;
- sparc | sparcv9)
+ sh3 | sh4 | sh3eb | sh4eb)
+ basic_machine=sh-unknown
+ ;;
+ sparc | sparcv9 | sparcv9b)
basic_machine=sparc-sun
;;
cydra)
basic_machine=c4x-none
os=-coff
;;
+ *-unknown)
+ # Make sure to match an already-canonicalized machine name.
+ ;;
*)
echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
exit 1
| -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
| -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
| -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+ | -chorusos* | -chorusrdb* \
| -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
| -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
- | -interix* | -uwin* | -rhapsody* | -openstep* | -oskit*)
+ | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \
+ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+ | -os2* | -vos*)
# Remember, each alternative MUST END IN *, to match a version number.
;;
+ -qnx*)
+ case $basic_machine in
+ x86-* | i*86-*)
+ ;;
+ *)
+ os=-nto$os
+ ;;
+ esac
+ ;;
+ -nto*)
+ os=-nto-qnx
+ ;;
-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
| -windows* | -osx | -abug | -netware* | -os9* | -beos* \
- | -macos* | -mpw* | -magic* | -mon960* | -lnews*)
+ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
;;
-mac*)
os=`echo $os | sed -e 's|mac|macos|'`
-sunos6*)
os=`echo $os | sed -e 's|sunos6|solaris3|'`
;;
+ -opened*)
+ os=-openedition
+ ;;
+ -wince*)
+ os=-wince
+ ;;
-osfrose*)
os=-osfrose
;;
-ns2 )
os=-nextstep2
;;
+ -nsk*)
+ os=-nsk
+ ;;
# Preserve the version number of sinix5.
-sinix5.*)
os=`echo $os | sed -e 's|sinix|sysv|'`
-xenix)
os=-xenix
;;
- -*mint | -*MiNT)
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
os=-mint
;;
-none)
*-acorn)
os=-riscix1.2
;;
- arm*-corel)
+ arm*-rebel)
os=-linux
;;
arm*-semi)
os=-aout
;;
+ pdp10-*)
+ os=-tops20
+ ;;
pdp11-*)
os=-none
;;
*-masscomp)
os=-rtu
;;
- f301-fujitsu)
+ f30[01]-fujitsu | f700-fujitsu)
os=-uxpv
;;
*-rom68k)
-genix*)
vendor=ns
;;
- -mvs*)
+ -mvs* | -opened*)
vendor=ibm
;;
-ptx*)
-mpw* | -macos*)
vendor=apple
;;
- -*mint | -*MiNT)
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
vendor=atari
;;
+ -vos*)
+ vendor=stratus
+ ;;
esac
basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
;;
esac
echo $basic_machine$os
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
MICRO_VERSION=3
INTERFACE_AGE=0
BINARY_AGE=0
-EXTRA_VERSION=claws2
+EXTRA_VERSION=claws3
VERSION=$MAJOR_VERSION.$MINOR_VERSION.$MICRO_VERSION$EXTRA_VERSION
dnl
# Find the correct PATH separator. Usually this is `:', but
# DJGPP uses `;' like DOS.
-if test "X${PATH_SEPARATOR+set}" != "Xset"; then
+if test "X${PATH_SEPARATOR+set}" != Xset; then
UNAME=${UNAME-`uname 2>/dev/null`}
case X$UNAME in
*-DOS) PATH_SEPARATOR=';' ;;
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
-if test "${CDPATH+set}" = set; then CDPATH=; export CDPATH; fi
+if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
-if test "X${echo_test_string+set}" != "Xset"; then
+if test "X${echo_test_string+set}" != Xset; then
# find a string as large as possible, as long as the shell can cope with it
for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
# expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
# Constants:
PROGRAM=ltconfig
PACKAGE=libtool
-VERSION=1.3.3
-TIMESTAMP=" (1.385.2.181 1999/07/02 15:49:11)"
-ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.c 1>&5'
-ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.c $LIBS 1>&5'
+VERSION=1.3.5
+TIMESTAMP=" (1.385.2.206 2000/05/27 11:12:27)"
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
rm="rm -f"
help="Try \`$progname --help' for more information."
# Only set LANG and LC_ALL to C if already set.
# These must not be set unconditionally because not all systems understand
# e.g. LANG=C (notably SCO).
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
-if test "${LANG+set}" = set; then LANG=C; export LANG; fi
+if test "X${LC_ALL+set}" = Xset; then LC_ALL=C; export LC_ALL; fi
+if test "X${LANG+set}" = Xset; then LANG=C; export LANG; fi
if test -n "$cache_file" && test -r "$cache_file"; then
echo "loading cache $cache_file within ltconfig"
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
- if test "${COLLECT_NAMES+set}" != set; then
+ if test "X${COLLECT_NAMES+set}" != Xset; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
link_static_flag='-static'
case "$host_os" in
- beos* | irix5* | irix6* | osf3* | osf4*)
+ beos* | irix5* | irix6* | osf3* | osf4* | osf5*)
# PIC is the default for these OSes.
;;
aix*)
# We can build DLLs from non-PIC.
;;
- osf3* | osf4*)
+ osf3* | osf4* | osf5*)
# All OSF/1 code is PIC.
wl='-Wl,'
link_static_flag='-non_shared'
# Extract the symbol export list from an `--export-all' def file,
# then regenerate the def file from the symbol export list, so that
# the compiled dll only exports the symbol export list.
+ # Be careful not to strip the DATA tag left by newer dlltools.
export_symbols_cmds='test -f $objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~
test -f $objdir/$soname-ltdll.$objext || (cd $objdir && $CC -c $soname-ltdll.c)~
$DLLTOOL --export-all --exclude-symbols DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12 --output-def $objdir/$soname-def $objdir/$soname-ltdll.$objext $libobjs $convenience~
- sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]* ; *//" < $objdir/$soname-def > $export_symbols'
+ sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $objdir/$soname-def > $export_symbols'
+ # If DATA tags from a recent dlltool are present, honour them!
archive_expsym_cmds='echo EXPORTS > $objdir/$soname-def~
_lt_hint=1;
- for symbol in `cat $export_symbols`; do
- echo " \$symbol @ \$_lt_hint ; " >> $objdir/$soname-def;
+ cat $export_symbols | while read symbol; do
+ set dummy \$symbol;
+ case \$# in
+ 2) echo " \$2 @ \$_lt_hint ; " >> $objdir/$soname-def;;
+ *) echo " \$2 @ \$_lt_hint \$3 ; " >> $objdir/$soname-def;;
+ esac;
_lt_hint=`expr 1 + \$_lt_hint`;
done~
test -f $objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $0 > $objdir/$soname-ltdll.c~
;;
netbsd*)
- if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname -o $lib'
archive_expsym_cmds='$CC -shared $libobjs $deplibs $linkopts ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
fi
;;
- solaris*)
+ solaris* | sysv5*)
if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
ld_shlibs=no
cat <<EOF 1>&2
whole_archive_flag_spec=
;;
*)
- whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then
+ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ whole_archive_flag_spec=
+ fi
;;
esac
fi
old_archive_from_new_cmds='emximp -o $objdir/$libname.a $objdir/$libname.def'
;;
- osf3* | osf4*)
+ osf3*)
if test "$with_gcc" = yes; then
allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
hardcode_libdir_separator=:
;;
+ osf4* | osf5*) # As osf3* with the addition of the -msym flag
+ if test "$with_gcc" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $linkopts ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linkopts -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+ fi
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ rhapsody*)
+ archive_cmds='$CC -bundle -undefined suppress -o $lib $libobjs $deplibs $linkopts'
+ hardcode_libdir_flags_spec='-L$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
sco3.2v5*)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
hardcode_shlibpath_var=no
;;
sysv4)
- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+ if test "x$host_vendor" = xsequent; then
+ # Use $CC to link under sequent, because it throws in some extra .o
+ # files that make .init and .fini sections work.
+ archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $linkopts'
+ else
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+ fi
runpath_var='LD_RUN_PATH'
hardcode_shlibpath_var=no
hardcode_direct=no #Motorola manual says yes, but my tests say they lie
export_dynamic_flag_spec='-Bexport'
;;
+ sysv5*)
+ no_undefined_flag=' -z text'
+ # $CC -shared without GNU ld will not create a library from C++
+ # object files and a static libstdc++, better avoid it by now
+ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linkopts'
+ archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linkopts~$rm $lib.exp'
+ hardcode_libdir_flag_spec=
+ hardcode_shlibpath_var=no
+ runpath_var='LD_RUN_PATH'
+ ;;
+
uts4*)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
hardcode_libdir_flag_spec='-L$libdir'
;;
sysv4*MP*)
- if test -d /usr/nec ;then
- # archive_cmds='$LD -G -z text -h $soname -o $lib$libobjs$deplibs'
- archive_cmds='$LD -G -h $soname -o $lib$libobjs$deplibs'
+ if test -d /usr/nec; then
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+ hardcode_shlibpath_var=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ ld_shlibs=yes
+ fi
+ ;;
+
+ sysv4.2uw2*)
+ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linkopts'
+ hardcode_direct=yes
+ hardcode_minus_L=no
hardcode_shlibpath_var=no
- runpath_var=LD_RUN_PATH
hardcode_runpath_var=yes
- ld_shlibs=yes
- fi
+ runpath_var=LD_RUN_PATH
+ ;;
+
+ unixware7*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts'
+ runpath_var='LD_RUN_PATH'
+ hardcode_shlibpath_var=no
;;
*)
main(){nm_test_var='a';nm_test_func();return(0);}
EOF
- echo "$progname:1592: checking if global_symbol_pipe works" >&5
- if { (eval echo $progname:1593: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.$objext; then
+ echo "$progname:1653: checking if global_symbol_pipe works" >&5
+ if { (eval echo $progname:1654: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; } && test -s conftest.$objext; then
# Now try to grab the symbols.
nlist=conftest.nm
- if { echo "$progname:1596: eval \"$NM conftest.$objext | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.$objext | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then
+ if { echo "$progname:1657: eval \"$NM conftest.$objext | $global_symbol_pipe > $nlist\"" >&5; eval "$NM conftest.$objext | $global_symbol_pipe > $nlist 2>&5"; } && test -s "$nlist"; then
# Try sorting and uniquifying the output.
if sort "$nlist" | uniq > "$nlist"T; then
save_CFLAGS="$CFLAGS"
LIBS="conftstm.$objext"
CFLAGS="$CFLAGS$no_builtin_flag"
- if { (eval echo $progname:1648: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ if { (eval echo $progname:1709: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
pipe_works=yes
else
echo "$progname: failed program was:" >&5
bsdi4*)
version_type=linux
- library_names_spec='${libname}.so$major ${libname}.so'
- soname_spec='${libname}.so'
+ need_version=no
+ library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so'
+ soname_spec='${libname}${release}.so$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
file_magic_test_file=/shlib/libc.so
sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ export_dynamic_flag_spec=-rdynamic
# the default ld.so.conf also contains /usr/contrib/lib and
# /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
# libtool to hard-code these into programs
need_version=yes
;;
esac
- finish_cmds='PATH="\$PATH:/sbin" OBJFORMAT="'"$objformat"'" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
case "$host_os" in
- freebsd2* | freebsd3.[01]*)
+ freebsd2* | freebsd3.[01]* | freebsdelf3.[01]*)
shlibpath_overrides_runpath=yes
;;
*) # from 3.2 on
library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so'
soname_spec='${libname}${release}.so$major'
shlibpath_var=LD_LIBRARY_PATH
+ deplibs_check_method=pass_all
;;
hpux9* | hpux10* | hpux11*)
soname_spec='${libname}${release}.sl$major'
# HP-UX runs *really* slowly unless shared libraries are mode 555.
postinstall_cmds='chmod 555 $lib'
+ case "$host_os" in
+ hpux10.20*)
+ # TODO: Does this work for hpux-11 too?
+ deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+ file_magic_cmd=/usr/bin/file
+ file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ esac
;;
irix5* | irix6*)
*-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;;
*) libsuff= shlibsuff= libmagic=never-match;;
esac
- # this will be overridden with pass_all, but let us keep it just in case
- deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
;;
esac
shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
- deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
- file_magic_cmd=/usr/bin/file
- file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+ deplibs_check_method=pass_all
if test -f /lib/ld.so.1; then
dynamic_linker='GNU ld.so'
shlibpath_var=LIBPATH
;;
-osf3* | osf4*)
+osf3* | osf4* | osf5*)
version_type=osf
need_version=no
soname_spec='${libname}${release}.so'
sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
;;
+rhapsody*)
+ version_type=sunos
+ library_names_spec='${libname}.so'
+ soname_spec='${libname}.so'
+ shlibpath_var=DYLD_LIBRARY_PATH
+ deplibs_check_method=pass_all
+ ;;
+
sco3.2v5*)
version_type=osf
soname_spec='${libname}${release}.so$major'
soname_spec='${libname}${release}.so$major'
shlibpath_var=LD_LIBRARY_PATH
case "$host_vendor" in
+ sequent)
+ file_magic_cmd='/bin/file'
+ deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+ ;;
ncr)
deplibs_check_method='pass_all'
;;
if eval "test \"`echo '$''{'lt_cv_dlopen'+set}'`\" != set"; then
lt_cv_dlopen=no lt_cv_dlopen_libs=
echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "$progname:2170: checking for dlopen in -ldl" >&5
+echo "$progname:2248: checking for dlopen in -ldl" >&5
ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2178 "ltconfig"
+#line 2256 "ltconfig"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
char dlopen();
int main() {
dlopen()
; return 0; }
EOF
-if { (eval echo $progname:2188: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo $progname:2269: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dlopen""... $ac_c" 1>&6
-echo "$progname:2207: checking for dlopen" >&5
+echo "$progname:2288: checking for dlopen" >&5
if eval "test \"`echo '$''{'ac_cv_func_dlopen'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2212 "ltconfig"
+#line 2293 "ltconfig"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char dlopen(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
char dlopen();
int main() {
; return 0; }
EOF
-if { (eval echo $progname:2234: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo $progname:2318: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_dlopen=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for dld_link in -ldld""... $ac_c" 1>&6
-echo "$progname:2251: checking for dld_link in -ldld" >&5
+echo "$progname:2335: checking for dld_link in -ldld" >&5
ac_lib_var=`echo dld'_'dld_link | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldld $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2259 "ltconfig"
+#line 2343 "ltconfig"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
char dld_link();
int main() {
dld_link()
; return 0; }
EOF
-if { (eval echo $progname:2269: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo $progname:2356: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for shl_load""... $ac_c" 1>&6
-echo "$progname:2288: checking for shl_load" >&5
+echo "$progname:2375: checking for shl_load" >&5
if eval "test \"`echo '$''{'ac_cv_func_shl_load'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2293 "ltconfig"
+#line 2380 "ltconfig"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char shl_load(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
char shl_load();
int main() {
; return 0; }
EOF
-if { (eval echo $progname:2315: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo $progname:2405: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_shl_load=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for shl_load in -ldld""... $ac_c" 1>&6
-echo "$progname:2333: checking for shl_load in -ldld" >&5
+echo "$progname:2423: checking for shl_load in -ldld" >&5
ac_lib_var=`echo dld'_'shl_load | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldld $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2341 "ltconfig"
+#line 2431 "ltconfig"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
char shl_load();
int main() {
shl_load()
; return 0; }
EOF
-if { (eval echo $progname:2352: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo $progname:2445: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_hdr in dlfcn.h; do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "$progname:2395: checking for $ac_hdr" >&5
+echo "$progname:2488: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2400 "ltconfig"
+#line 2493 "ltconfig"
#include <$ac_hdr>
int fnord = 0;
EOF
-ac_try="$ac_compile conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo $progname:2405: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_try="$ac_compile >/dev/null 2>conftest.out"
+{ (eval echo $progname:2498: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
LIBS="$lt_cv_dlopen_libs $LIBS"
echo $ac_n "checking whether a program can dlopen itself""... $ac_c" 1>&6
-echo "$progname:2433: checking whether a program can dlopen itself" >&5
+echo "$progname:2526: checking whether a program can dlopen itself" >&5
if test "${lt_cv_dlopen_self+set}" = set; then
echo $ac_n "(cached) $ac_c" 1>&6
else
lt_cv_dlopen_self=cross
else
cat > conftest.c <<EOF
-#line 2441 "ltconfig"
+#line 2534 "ltconfig"
#if HAVE_DLFCN_H
#include <dlfcn.h>
if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); }
EOF
-if { (eval echo $progname:2487: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo $progname:2580: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
lt_cv_dlopen_self=yes
else
if test "$lt_cv_dlopen_self" = yes; then
LDFLAGS="$LDFLAGS $link_static_flag"
echo $ac_n "checking whether a statically linked program can dlopen itself""... $ac_c" 1>&6
-echo "$progname:2506: checking whether a statically linked program can dlopen itself" >&5
+echo "$progname:2599: checking whether a statically linked program can dlopen itself" >&5
if test "${lt_cv_dlopen_self_static+set}" = set; then
echo $ac_n "(cached) $ac_c" 1>&6
else
lt_cv_dlopen_self_static=cross
else
cat > conftest.c <<EOF
-#line 2514 "ltconfig"
+#line 2607 "ltconfig"
#if HAVE_DLFCN_H
#include <dlfcn.h>
if(ptr1 || ptr2) { dlclose(self); exit(0); } } exit(1); }
EOF
-if { (eval echo $progname:2560: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo $progname:2653: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
lt_cv_dlopen_self_static=yes
else
# NOTE: Changes made to this file will be lost: look at ltconfig or ltmain.sh.
#
# Copyright (C) 1996-1999 Free Software Foundation, Inc.
-# Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
-if test "\${CDPATH+set}" = set; then CDPATH=; export CDPATH; fi
+if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
### BEGIN LIBTOOL CONFIG
EOF
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
-if test "${COLLECT_NAMES+set}" != set; then
+if test "X${COLLECT_NAMES+set}" != Xset; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
# Append the ltmain.sh script.
sed '$q' "$ltmain" >> "$ofile" || (rm -f "$ofile"; exit 1)
+ # We use sed instead of cat because bash on DJGPP gets confused if
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
chmod +x "$ofile"
;;
# Constants.
PROGRAM=ltmain.sh
PACKAGE=libtool
-VERSION=1.4
-TIMESTAMP=" (1.920 2001/04/24 23:26:18)"
+VERSION=1.4.2
+TIMESTAMP=" (1.922.2.53 2001/09/11 03:18:52)"
default_mode=
help="Try \`$progname --help' for more information."
save_LANG="$LANG"; LANG=C; export LANG
fi
+# Make sure IFS has a sensible default
+: ${IFS=" "}
+
if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
echo "$modename: not configured to build any kind of library" 1>&2
echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
exit 1
fi
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end. This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
if test -z "$show_help"; then
# Infer the operation mode.
-Wc,*)
args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
lastarg=
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=','
+ save_ifs="$IFS"; IFS=','
for arg in $args; do
IFS="$save_ifs"
# Now arrange that obj and lo_libobj become the same file
$show "(cd $xdir && $LN_S $baseobj $libobj)"
if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then
+ # Unlock the critical section if it was locked
+ if test "$need_locks" != no; then
+ $run $rm "$lockfile"
+ fi
exit 0
else
error=$?
# These systems don't actually have a C library (as such)
test "X$arg" = "X-lc" && continue
;;
+ *-*-openbsd*)
+ # Do not include libc due to us having libc/libc_r.
+ test "X$arg" = "X-lc" && continue
+ ;;
+ esac
+ elif test "X$arg" = "X-lc_r"; then
+ case $host in
+ *-*-openbsd*)
+ # Do not include libc_r directly, use -pthread flag.
+ continue
+ ;;
esac
fi
deplibs="$deplibs $arg"
-Wc,*)
args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
arg=
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=','
+ save_ifs="$IFS"; IFS=','
for flag in $args; do
IFS="$save_ifs"
case $flag in
-Wl,*)
args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
arg=
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=','
+ save_ifs="$IFS"; IFS=','
for flag in $args; do
IFS="$save_ifs"
case $flag in
if test -f "$output_objdir/$soname-def"; then :
else
$show "extracting exported symbol list from \`$soname'"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ save_ifs="$IFS"; IFS='~'
eval cmds=\"$extract_expsyms_cmds\"
for cmd in $cmds; do
IFS="$save_ifs"
# Create $newlib
if test -f "$output_objdir/$newlib"; then :; else
$show "generating import library for \`$soname'"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ save_ifs="$IFS"; IFS='~'
eval cmds=\"$old_archive_from_expsyms_cmds\"
for cmd in $cmds; do
IFS="$save_ifs"
echo "*** Therefore, libtool will create a static module, that should work "
echo "*** as long as the dlopening application is linked with the -dlopen flag."
if test -z "$global_symbol_pipe"; then
- echo
- echo "*** However, this would only work if libtool was able to extract symbol"
- echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
- echo "*** not find such a program. So, this module is probably useless."
- echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ echo
+ echo "*** However, this would only work if libtool was able to extract symbol"
+ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** not find such a program. So, this module is probably useless."
+ echo "*** \`nm' from GNU binutils and a full rebuild may help."
fi
if test "$build_old_libs" = no; then
- build_libtool_libs=module
- build_old_libs=yes
+ build_libtool_libs=module
+ build_old_libs=yes
else
- build_libtool_libs=no
+ build_libtool_libs=no
fi
fi
else
else
# Parse the version information argument.
- IFS="${IFS= }"; save_ifs="$IFS"; IFS=':'
+ save_ifs="$IFS"; IFS=':'
set dummy $vinfo 0 0 0
IFS="$save_ifs"
if test -z "$vinfo" && test -n "$release"; then
major=
verstring="0.0"
+ case $version_type in
+ darwin)
+ # we can't check for "0.0" in archive_cmds due to quoting
+ # problems, so we reset it completely
+ verstring=""
+ ;;
+ *)
+ verstring="0.0"
+ ;;
+ esac
if test "$need_version" = no; then
versuffix=
else
*-*-netbsd*)
# Don't link with libc until the a.out ld.so is fixed.
;;
+ *-*-openbsd*)
+ # Do not include libc due to us having libc/libc_r.
+ ;;
*)
# Add libc to deplibs on all other systems if necessary.
if test $build_libtool_need_lc = "yes"; then
export_symbols="$output_objdir/$libname.exp"
$run $rm $export_symbols
eval cmds=\"$export_symbols_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
$show "$cmd"
else
eval cmds=\"$archive_cmds\"
fi
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
$show "$cmd"
output="$obj"
eval cmds=\"$reload_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
$show "$cmd"
reload_objs="$libobjs $reload_conv_objs"
output="$libobj"
eval cmds=\"$reload_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
$show "$cmd"
#undef lt_preloaded_symbols
#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
+# define lt_ptr void *
#else
-# define lt_ptr_t char *
+# define lt_ptr char *
# define const
#endif
/* The mapping between symbol names and symbols. */
const struct {
const char *name;
- lt_ptr_t address;
+ lt_ptr address;
}
lt_preloaded_symbols[] =
{\
"
- sed -n -e 's/^: \([^ ]*\) $/ {\"\1\", (lt_ptr_t) 0},/p' \
- -e 's/^. \([^ ]*\) \([^ ]*\)$/ {"\2", (lt_ptr_t) \&\2},/p' \
- < "$nlist" >> "$output_objdir/$dlsyms"
+ eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
$echo >> "$output_objdir/$dlsyms" "\
- {0, (lt_ptr_t) 0}
+ {0, (lt_ptr) 0}
};
/* This works around a problem in FreeBSD linker */
# relink executable if necessary
if test -n \"\$relink_command\"; then
- if (eval \$relink_command); then :
+ if relink_command_output=\`eval \$relink_command 2>&1\`; then :
else
+ $echo \"\$relink_command_output\" >&2
$rm \"\$progdir/\$file\"
exit 1
fi
eval cmds=\"$old_archive_cmds\"
fi
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
$show "$cmd"
# Do each command in the postinstall commands.
lib="$destdir/$realname"
eval cmds=\"$postinstall_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
$show "$cmd"
# Do each command in the postinstall commands.
eval cmds=\"$old_postinstall_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
$show "$cmd"
if test -n "$current_libdirs"; then
# Maybe just do a dry run.
test -n "$run" && current_libdirs=" -n$current_libdirs"
- exec $SHELL $0 --finish$current_libdirs
- exit 1
+ exec_cmd='$SHELL $0 --finish$current_libdirs'
+ else
+ exit 0
fi
-
- exit 0
;;
# libtool finish mode
if test -n "$finish_cmds"; then
# Do each command in the finish commands.
eval cmds=\"$finish_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
$show "$cmd"
LANG="$save_LANG"; export LANG
fi
- # Now actually exec the command.
- eval "exec \$cmd$args"
-
- $echo "$modename: cannot exec \$cmd$args"
- exit 1
+ # Now prepare to actually exec the command.
+ exec_cmd='"$cmd"$args'
else
# Display what would be done.
if test -n "$shlibpath_var"; then
# Don't error if the file doesn't exist and rm -f was used.
if (test -L "$file") >/dev/null 2>&1 \
- || (test -h "$file") >/dev/null 2>&1 \
+ || (test -h "$file") >/dev/null 2>&1 \
|| test -f "$file"; then
- :
+ :
elif test -d "$file"; then
- exit_status=1
+ exit_status=1
continue
elif test "$rmforce" = yes; then
- continue
+ continue
fi
rmfiles="$file"
if test -n "$library_names"; then
# Do each command in the postuninstall commands.
eval cmds=\"$postuninstall_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
$show "$cmd"
if test -n "$old_library"; then
# Do each command in the old_postuninstall commands.
eval cmds=\"$old_postuninstall_cmds\"
- IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
+ save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
$show "$cmd"
;;
esac
- $echo "$modename: invalid operation mode \`$mode'" 1>&2
- $echo "$generic_help" 1>&2
- exit 1
+ if test -z "$exec_cmd"; then
+ $echo "$modename: invalid operation mode \`$mode'" 1>&2
+ $echo "$generic_help" 1>&2
+ exit 1
+ fi
fi # test -z "$show_help"
+if test -n "$exec_cmd"; then
+ eval exec $exec_cmd
+ exit 1
+fi
+
# We need to display help for each of the modes.
case $mode in
"") $echo \
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
-# Copyright (C) 1996, 1997 Free Software Foundation, Inc.
-# Franc,ois Pinard <pinard@iro.umontreal.ca>, 1996.
+# Copyright 1996, 1997, 1999, 2000 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
if test $# -eq 0; then
echo 1>&2 "Try \`$0 --help' for more information"
exit 1
fi
+run=:
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+ configure_ac=configure.ac
+else
+ configure_ac=configure.in
+fi
+
+case "$1" in
+--run)
+ # Try to run requested program, and just exit if it succeeds.
+ run=
+ shift
+ "$@" && exit 0
+ ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
case "$1" in
-h|--h|--he|--hel|--help)
Options:
-h, --help display this help and exit
-v, --version output version information and exit
+ --run try to run the given command, and emulate it if it fails
Supported PROGRAM values:
aclocal touch file \`aclocal.m4'
automake touch all \`Makefile.in' files
bison create \`y.tab.[ch]', if possible, from existing .[ch]
flex create \`lex.yy.c', if possible, from existing .c
+ help2man touch the output file
lex create \`lex.yy.c', if possible, from existing .c
makeinfo touch the output file
+ tar try tar, gnutar, gtar, then tar without non-portable flags
yacc create \`y.tab.[ch]', if possible, from existing .[ch]"
;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version)
- echo "missing - GNU libit 0.0"
+ echo "missing 0.3 - GNU automake"
;;
-*)
aclocal)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
- you modified \`acinclude.m4' or \`configure.in'. You might want
+ you modified \`acinclude.m4' or \`${configure_ac}'. You might want
to install the \`Automake' and \`Perl' packages. Grab them from
any GNU archive site."
touch aclocal.m4
autoconf)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
- you modified \`configure.in'. You might want to install the
+ you modified \`${configure_ac}'. You might want to install the
\`Autoconf' and \`GNU m4' packages. Grab them from any GNU
archive site."
touch configure
autoheader)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
- you modified \`acconfig.h' or \`configure.in'. You might want
+ you modified \`acconfig.h' or \`${configure_ac}'. You might want
to install the \`Autoconf' and \`GNU m4' packages. Grab them
from any GNU archive site."
- files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' configure.in`
+ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
test -z "$files" && files="config.h"
touch_files=
for f in $files; do
automake)
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
- you modified \`Makefile.am', \`acinclude.m4' or \`configure.in'.
+ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
You might want to install the \`Automake' and \`Perl' packages.
Grab them from any GNU archive site."
find . -type f -name Makefile.am -print |
fi
;;
+ help2man)
+ echo 1>&2 "\
+WARNING: \`$1' is missing on your system. You should only need it if
+ you modified a dependency of a manual page. You may need the
+ \`Help2man' package in order for those modifications to take
+ effect. You can get \`Help2man' from any GNU archive site."
+
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ if test -z "$file"; then
+ file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+ fi
+ if [ -f "$file" ]; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo ".ab help2man is required to generate this page"
+ exit 1
+ fi
+ ;;
+
makeinfo)
+ if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
+ # We have makeinfo, but it failed.
+ exit 1
+ fi
+
echo 1>&2 "\
WARNING: \`$1' is missing on your system. You should only need it if
you modified a \`.texi' or \`.texinfo' file, or any other file
touch $file
;;
+ tar)
+ shift
+ if test -n "$run"; then
+ echo 1>&2 "ERROR: \`tar' requires --run"
+ exit 1
+ fi
+
+ # We have already tried tar in the generic part.
+ # Look for gnutar/gtar before invocation to avoid ugly error
+ # messages.
+ if (gnutar --version > /dev/null 2>&1); then
+ gnutar ${1+"$@"} && exit 0
+ fi
+ if (gtar --version > /dev/null 2>&1); then
+ gtar ${1+"$@"} && exit 0
+ fi
+ firstarg="$1"
+ if shift; then
+ case "$firstarg" in
+ *o*)
+ firstarg=`echo "$firstarg" | sed s/o//`
+ tar "$firstarg" ${1+"$@"} && exit 0
+ ;;
+ esac
+ case "$firstarg" in
+ *h*)
+ firstarg=`echo "$firstarg" | sed s/h//`
+ tar "$firstarg" ${1+"$@"} && exit 0
+ ;;
+ esac
+ fi
+
+ echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+ You may want to install GNU tar or Free paxutils, or check the
+ command line arguments."
+ exit 1
+ ;;
+
*)
echo 1>&2 "\
WARNING: \`$1' is needed, and you do not seem to have it handy on your